European Aviation delegation visited Treos new laboratory in Hamburg
A European delegation from East and West visited our new environmental simulation laboratory in Hamburg-Harburg on November 25th. Professionals and managers of the Green Mobility Conference gained a deep insight into 3 chosen companies: Lufthansa Technik AG, Laser Zentrum Nord GmbH and our environmental simulation laboratory!
How Treo’s testing and environmental simulation methods can enrich the aviation development effectively was presented by Managing Director Hanno Frömming and shown at the tour through our laboratory. Afterwards we exchanged and networked in a relaxed atmosphere with Christmas cookies.
Thank you for the inspiring and exciting afternoon. We are looking forward to be able to shape the future EU-project work in the sector of aviation!
„Auf dem Prüfstand“ - Article on Hanno Frömming by Hamburg Aviation
Treo laboratory as well as its managing director Dr. Hanno Frömming have been pictured in the series „Standortpiloten“ by Hamburg Aviation.
Please find the complete article here.
Treo - Opening event 2014
At the opening of the new Treo environment simulation laboratory in Hamburg, Treo has opened its doors for about 70 customers and customer representatives on September 18th, 2014.
After the reception in the new building, the guests were welcomed by Managing Director Dr. Hanno Frömming. He introduced Treo: He focused on the history of Treo and the move from Stade to Hamburg. Furthermore Hanno Frömming presented the broad range of test capabilities. The new, modern infrastructure offers the best preconditions for high quality tests.
This was followed by interesting lectures of various speakers on the HIT Technopark, Challenges of mechanical, dynamic environmental simulation and high-speed EMC measurements and emission analysis in real time. Following, the visitors could check the various testing options in a tour through the perfectly equipped laboratory space.
The barbecue in a relaxed atmosphere completed the opening ceremony.
A good start to a promising future: Welcome to Treo in Hamburg!
Treo - Re-accreditation of both laboratories by DAkkS
Treo - Labor für Umweltsimulation GmbH is accredited according to DIN EN ISO/IEC 17025:2005. Now our two laboratories for environmental simulation and EMC were re-accredited by the Deutsche Akkreditierungsstelle GmbH (DAkkS). We used the re-accreditation to expand our accredited scope especially in the area EMC of some additional standards.
Our laboratory in Kiel is accredited for the current standards of the sectors industry, aviation, shipbuilding and military. With the re-accreditation we introduced the following additional standards:
• DIN EN 50121-3-2
• DIN EN 50121-4
• DIN EN 50130-4
• DIN EN 50155
• DIN EN 55011
• DIN EN 55013
• DIN EN 55020
• DIN EN 61000-6-1
• DIN EN 61000-6-2
• DIN EN 61000-6-3
• DIN EN 61000-6-4
• DIN EN 61326-1
• Germanischer Lloyd VI Teil 7-2
• Lloyd’s Register Type Approval Test Specification Number 1
• British Defence Standard 59-411
• Standardization Agreement STANAG No. 4437
• FCC Part 15
• FCC Part 18
We are pleased that from now on we can offer you tests according to the named standards.
Environmental Simulation Laboratory: Move to Hamburg is done
The house moving of the environmental simulation laboratory is completed!
We finally left Stade and arrived at our new facilities in Hamburg. Beginning from June, you find the environmental simulation laboratory at the HIT-Technopark in the district Harburg. Our new facilities offer many additional advantages compared to the old location in Stade.
The newly constructed buildings in Hamburg are larger, more modern und offer the best preconditions for high quality testing services.
The location of the new facilities is ideal, as well. The environmental simulation laboratory is located directly adjacent to the freeway. Therefore, it is easy to reach and it has the fantastic infrastructure of the HIT-Technopark. A special benefit for nationwide customers is the boarding house with 26 rooms and restaurant which is directly opposite to the building.
Our new address:
Phone: +49 (0)40 - 7097376 - 0
Fax: +49 (0)40 - 7097376 - 25
How to get to us.
Our EMC laboratory in Kiel is available as usual.
Treo receives certificate of DNV GL Approved Testing Laboratory
With it’s two accredited laboratories Treo has always performed environmental simulations and EMC testing on products for type approvals according to different shipbuilding-classification societies’ guidelines. In April 2014, DNV GL permitted the official certification „Approved Testing Laboratory”.
The laboratories audits in Stade and in Kiel were both approved without deviations. Therefore, the certificate for testing according to “Guidelines for the Performance of Type Approvals, VI-7-2 Test Requirements for Electrical / Electronic Equipment and Systems“ as well as for IP-protection testing was permitted. The certification also covers shipbuilding-specific tests like inclined position, overpressure and insulation resistance.
Treo will be present at the Aircraft Interiors Expo 2014 in Hamburg/Germany
From 8 - 10 April 2014 the world's biggest aircraft interiors exhibition takes place at the Hamburg Messe in Germany and this year Treo will be present as well.
You will find us in hall B6 stand D60 – 8.4 at the Hanse-Pavilion daily from 9 a.m. to 5 p.m.
We are looking forward to see you!
New top of the line EMC measuring system
With the recently introduced measuring system TDEMI X by Gauss Instruments, Treo now is able to accomplish emission tests up to 40 GHz. As the first service provider for testing solutions we use therewith the fastest system in the market at present. In this way, we can save our clients valuable time, because of the reduction of the testing time to a fraction of the usually required time.
Treo on Air: northern German TV station films at Treo
„Fußwärmer im Vergleich“ – Treo testet foot warmer in its thermal test chamber for the German broadcast show „Markt“.
Pictures and broadcast link you find here
Treo brings new low-pressure chamber into service
Thanks to the new low-pressure chamber by Treo, it is also possible to test larger components and more complex test set-ups. The unique system was developed by Treo and manufactured by VIS Vakuum und Industrieservice Meier. It simulates among other things a fast pressure drop in the cabin. The test chamber has a volume of 1,600 litres and is equipped with connectors for water, electricity and air so that systems or subsystems can be tested under realistic conditions with rapid pressure change. “As an accredited test laboratory we longly have offered pressure tests. However, we only had smaller systems on hand for the testing of individual components. With our new system we now meet the needs of aircraft manufacturers and suppliers of demanding tests for more complex systems and larger components. With its size and productivity, the new system now presents an unique characteristic for our company“, states Hanno Frömming, Managing Director of Treo.
NORTEC fair trade 2014
Treo was present at the NORTEC fair trade. From 21 to 24 January about 12,000 trade visitors came to North Germany´s most important meeting point for decision makers and experts in German machinery and plant engineering. A new record was made with 430 exhibitors presenting new production methods, machines and engineering services.
More informations und pictures
Treo will be present at the trade fair NORTEC 2014 in Hamburg/Germany
From the 21st till the 24th of January 2014 you will find us in hall A4 booth no. 406 daily from 9 a.m. to 5 p.m. We have organized many interesting things for you - it's worth a visit!
Newsletter » more