Lightning news: Treo is expanding its portfolio
Hit by lightning?!? Not any more – with Treo!
When an airplane gets hit by lightning things can get uncomfortable. With our new Indirect Lightning Test System AVI3000 by EMC Partner we can simulate the electromagnetical consequences of an airplane being struck by lightning and improve the capability of equipment to withstand such an event.
This compact system is capable of testing waveforms 1, 2, 3, 4, 5A and 6 as pin injection and ground injection in single pulse, multiple pulses and burst up to level 3. It has only one single coupler for all waveforms which makes it especially easy to use and very fast when it comes to testing.
With this additional testing possibility we can offer you tests according to RTCA/DO-160 Section 22 and MIL-STD-461 CS117 as a one-stop solution.
For a short amount of time during the introduction of the test procedure we will give you very attractive special conditions.
Intrigued? We look forward to hearing from you! Just contact us.
Huge construction progress
Status quo and visualisation
Since announcing the groundbreaking ceremony we have been very busy and we made a lot of progress. In this short amount of time we built the entire exterior construction including the roof. So today we are very excited to show you not only our progress but also the visualisation of the finished building!
We are really proud of this project and very happy about the fast realization. The next step will be to finish the interior structure so we can start to set up all of our testing stations.
We hope you are as excited about the new laboratory as we are. Of course we will keep you up to date – as fast as we possibly can.
We are hiring and looking for you!
The year 2019 is a year of growing and expanding for Treo. We are looking for qualified employees who look forward to the prospect of having an exciting job in a growing company.
At the moment we have available opening in different positions.
If you think that you are the perfetct candidate for us, you like to take charge and meet new challenges - you can apply directly here. We look forward to hearing from you.
Treo lays the first cornerstone for the future
Announcing our groundbreaking ceremony for the future as our EMC laboratory expands and moves to its new home in Neumünster.
With the constantly changing requirements and technological advancements of the market, Treo is growing and expanding to adjust to this change. The current premises in Kiel can no longer keep up with the growth of the business, therefore a new sustainable EMC laboratory will be built in Neumünster.
In order to find the perfect space, Treo worked with Wirtschaftsagentur Neumünster GmbH. The new laboratory will be finished by the end of the year. It’s site is close to the well-known designer outlet centre, which can be easily reached with various forms of transport.
The new build is attractive to many stakeholders; Treo will be creating new jobs, setting up more modern testing stations and designing customer friendly premises. Additional investments in test equipment will almost close the existing gaps in the accredited standards scope, enabling us to meet even more customer requirements from a single source.
The new proximity to our Hamburg location not only simplifies cooperation between the two branches, but also increases efficiency - from which everyone ultimately benefits.
We look forward to a brighter future and new, exciting projects.
And of course we will keep you up to date!
Quality, efficiency and effectiveness – and some space for a few laughs.
AIX 2019 - a complete success!
Treo's stay at the Aircraft Interiors Expo, the world's leading trade show for aircraft cabin interiors, has been successful again.
From 02 to 04 April we shared a booth with prettl electronics and presented - besides numerous international exhibitors at the fair - our latest developments in the field of aviation. We had the opportunity to talk to interested visitors about our testing methods. Thank you for an inspiring exchange.
We would be happy to choose AIX as our destination again - and look forward to welcoming you as a passenger on board!
AIX 2019 - Be a passenger on our flight!
"Ladies and gentlemen, we have just reached our final destination, the Hamburg fair. The Aircraft Interiors Expo, the world's leading trade fair for aircraft cabin interiors, awaits you here from 02.-04. April. Once again, exhibitors will present the latest innovations in the fields of cabin interiors, on-board entertainment and safety on board and take you on a fascinating tour through the halls of the Hamburg Exhibition Centre.
Don't miss the chance to visit Treo at booth 6C80B. Managing director Dr. Hanno Frömming will inform you about testing services of aircraft components and is looking forward to get in touch with interested visitors.
Get your free ticket now – an early check-in saves you the entrance fee of 50 Euro, which unregistered visitors are asked to pay.
We wish you a pleasant stay at the fair. Don't forget any baggage in the rack above your head or in the seat pockets in front of you. Goodbye.“
Successful days at the SMM 2018 in Hamburg
From 4.-7. September the worlds leading maritime trade fair took place in Hamburg. Treo was part of it – and for the first time represented on two „Decks“.
The maritime fair in Hamburgs exhibition halls brought together about 50000 trade visitors from 120 countries and offered a vibrant program with the focus on trends in the global maritime industry. Topics like digitization and green shipping presented by 2289 exhibitors from 69 nations made the event a colorful and innovative one.
Treo was present at two exhibition stands and welcomed visitors firstly at the northern german shared booth with the WTSH and secondly in the „Maritime 3D Printing Show Area“. At the center of the new exhibition area was the technology of 3D-printing and it’s advantages for the shipbuilding industry, which even more underlined Frank Coles words, the digital transformation would slowly reach the maritime sector.
Treo contributed alongside the Maritime Cluster and other experts and was available to answer questions of trade visitors, who had the possibility to watch additive manufacturing live and on the spot. Four steps illustrated the Supply Chain of 3D-printing as well as economical and ecological advantages of the technology. How essential the verification of function and durability of printed objects is and how our laboratories come into play here, was clarified.
Important visitors made our stay at the fair even more special: The economic senator Mr. Horch as well as state senator Dr. Rohlfs took their time to visit the booth and were quickly involved into interesting conversations – for example with our trainees.
The days at the SMM have been successful and exciting for us. Besides presenting our broad portfolio with special services for the shipbuilding industry, we were more than pleased to be part of the „Maritime 3D Printing Show Area“. We are looking forward to keep an eye on maritime trends and to be present at the next SMM again.
Treos expertise now in all heights
Two of our EMV specialists have sucessfully absolved the training course DGUV height safety and height rescue according to DGUV 112-198,199, BGI 657 and recommendations of VDSI. Our customers who want to feel safe in higher circumstances can now look forward to support.
Julia Doering and Arved Bahde are looking forward to provide their knowledge in exceptional places. This especially creates new opportunities for the sector of wind power.
Feel free to contact us directly via mail at E-Mail or call +49 (0)40 709 73 76 - 10.
Speed Dating with Treo
Setting up new business contacts through speed dating – the sucessful concept is organized in collaboration with Hanse-Aerospace, germans biggest independant association of suppliers and service providers of the aerospace industry.
On 14 June at 3pm Treo opens their doors for a new networking event.
The speed dating offers participating companies the possibilty to get in touch with each other. Short conversations between visitors enable to find intersections and form a common basis for new business relationships. Not only companies who have not yet been in contact can benefit from the networking concept. Also individual participants can take advantage of the opportunity and set up new contacts.
Treos managing director Hanno Frömming has made positive experiences with the networking event and is convinced that the speeddating on Thursday will bring enriching and sucessful encounters between visiting companies.
Photos and reviews will follow.
Electrical safety – Treo sets up a new laboratory sector
Our location in Hamburg is pleased about new equipment.
Therefore we have expandedour opportunities in electrical safety.
From now on Treo offers complete testing for the electrical safety of your products, f.e. according to
- DIN EN 61010-1 (electrical measuring, control, regulating and laboratory devices)
- DIN EN 62368-1 (audio / video, information and communication technology)
- DIN EN 60598-1 (luminaires)
For more information click here or directly contact Yacine Noureddine, Tel.: +49 (0) 40 709 73 76-27.
Even more tests from one source at Treo
We are happy to announce the expansion of our flexible accreditation in our environmental simulation laboratory.
The DAkkS accredited new testing methods at our location in Hamburg:
- acoustic measurements
- ball impact / spring hammer tests
- Xenon weathering / solar radiation
- centrifuge tests/ constant acceleration
According to that even more tests from a single source are made possible.
AIX 2018 – Uplifting days at the Hamburg fair
From 10th to 12th April the AIX, biggest global event of aircraft industry, took place in Hamburg. Like every year international exhibitors informed about newest developments in aircraft.
We welcomed visitors at our stand and informed them about our testing services of aircraft components. Our stay at the fair has been filled with lively and interesting talks and encouters and already makes us look forward to the next AIX.
Thank you for the inspiring exchange.
AIX 2018 – Stopover at Treo
The Aircraft Interiors Expo 2018 is finally approaching Hamburg. From 10. - 12. April it will have it’s spectacular stopover at the Hamburg fair – time to check in and get some free tickets.
From 10.-12. April we invite you for a stopover at our stand 6C80/B. Don’t miss the chance to inform yourself about Treos testing services of aircraft components. You also have the possibility to talk with managing director Dr. Hanno Frömming about current developments and requirements.
We are looking forward to meeting you!
10.-12. April 2018 | daily 09:00-17:00 Uhr Stand: 6C80/B | Hamburg fair hall B6
You haven’t got a ticket yet? Get your free tickets for the AIX 2018 here.
If you are interested in meeting Dr. Hanno Frömming, don’t hesitate to contact us. You can call +49 (0) 40 709 73 76-10 or email us at firstname.lastname@example.org.
Nortec 2018 – a success for Treo
Back in the test laboratory, we look back on a successful event
At Treo’s shared stand the atmosphere was relaxed, but the networking was busy. It was lovely to welcome so many familiar faces to our stand. We also made lots of exciting new contacts.
In the inspiring surroundings of the trade fair, the environmental conditions were ideal to inform people about the achievements of our test laboratory.
Now that one trade fair is over, we look forward to the next: the AIX 2018 on 10-12 April!
NORTEC 2018 - And the winner is..
This years Nortec in Hamburg held a special highlight for interested visitors: They had the possibility to participate in our competition. Now we proudly announce the winner, Christoph S., who won an Apple Watch Nike+.
Kendrion is winner of the X-Mas Challenge – donation goes to child protection agency Eutin
Our X-Mas Challenge has ended and we are proud to let you know that 23 teams participated.
The lovely choice of gingerbread houses made the decision not easy, but in the end we chose Kendrion Kuhnke Automation GmbH as the winner.
The creative team that built a winterish, snowcovered gingerbread house decided that Treos donation of 500 € should go to child protection agency Eutin and their project „Trostpflaster“.
We are happy to support the organisation who aims to help financially disadvantaged families and their children.
Treo invites you to the NORTEC!
Start the new year with an exciting event.
From 23. - 26. January 2018 you can visit the NORTEC in Hamburg.
More than 400 exhibitors from 16 different countries present a wide range of the production- and manufacturing technology; including current improvements.
We would like to invite you to our stand at A4.410. Don’t miss the chance to inform yourself about our services at the laboratory for environmental simulations and EMV. You will also have the chance to get in contact with others.
Furthermore you have the possibility to win an Apple Watch Series 3.
If you are interested in getting a free day ticket, email us at email@example.com. You can also arrange a personal meeting.
We are looking forward to seeing you!
Treo - X-Mas-Challenge
This christmas Treo wants to test you. Which team builds the most creative gingerbread house?
Let us test your creativity and social commitment.
You can also build your gingerbread house in a team. What matters: let your creativity run wild! Once done, send us a picture of your masterpiece. Our managing director Hanno Frömming will add EUR 20 each to our donation fund for the first 50 submissions. So it is up to you how much will be collected in the end!
We will select the winning picture after Christmas. The winner may decide which charitable organisation will receive the total sum.
We are looking forward to your picture of your piece of art!
Invitation: Treo is exhibiting at MEER Kontakte
The “MEER Kontakte” trade fair will take place for the first time from 8-9 November in Ostseekai, Kiel. It is targeted at the maritime industry: shipbuilding and suppliers, marine technology, shipping, offshore and much more.
Entrance is free for visitors.
As a full-service provider of accredited shipbuilding tests, this exhibition and the establishment of contacts at MEER Kontakte is a must for Treo.
In addition to many exhibitors from the maritime industry, you will also find an interesting supporting program with exciting lectures.
We hope to see you there as well.
Come and visit Treo at our stand No. 6 at the Ostseekai, Kiel on 8 November starting at 2pm or on 9 November starting 9am.
We look forward to your visit.
More information on the trade fair can be found here.
Contact us directly via email or call us
+49 (0) 40 709 73 76-10.
New system for dynamic inclination testing
Treo extends the possibilities for wave simulation
Using our new inclination testing rig, we can now also carry out dynamic testing on larger test pieces.
The correct function of marine products with moving parts must be ensured even under severe wave conditions. To guarantee this, the type approval for these products requires static and dynamic inclination tests. A special challenge here is the dynamic testing, where the test pieces must be tilted with defined displacements and velocities and remain functional.
Our new test rig creates sinusoidal wave movements with adjustable angles and velocities. Since it is considerably larger than its predecessor, test pieces weighing several hundred kilograms can also be tested. The test rig complies with the standard IACS E10 and all classification rules, as well as US Coast Guard specifications. The tests are accredited by DAkkS and certified by DNVGL. Furthermore, the tests are approved by the US Coast Guard for the testing of bilge water equipment and water treatment plants.
Contact us directly via email or call us
+49 (0) 40 709 73 76-10.
Your invitation to the Space Tech Expo Europe in Bremen - Germany
The Space Tech Expo Europe will be opening its doors in Bremen - Germany from October 24th to 26th 2017.
The trade fair is Europe’s main meeting place for new technologies and innovations in the space industry.
And naturally we will be there because environmental simulation and EMC also play an important role in space travel.
You can find us in Hall 5 at booth E70 along with our partner Gauss Instruments GmbH.
We will provide you with information on site about our new and established testing methods, especially for the space industry.
Visit our booth at Space Tech Expo and learn more about us and our testing methods.
To ensure you don’t have to wait at the ticket office, we would be happy to provide you with a ticket to print out in advance.
Just register by clicking on the link below, and you will immediately receive the ticket voucher by e-mail for free.
Please click HERE.
We look forward to seeing you!
You would like to arrange a meeting? Please contact us!
Call us now: +49 (0) 40 709 73 76-10 or email us: firstname.lastname@example.org
The sun now shines all year round at Treo!
Our new xenon weathering chamber allows us to simulate the complete spectrum of sunlight.
If your products are exposed to sunlight, this can lead to material changes over time, especially in conjunction with moisture and heat. As well as undesirable changes in appearance, this also often causes functional damage to the components. Especially for products made of plastic or with plastic coating, material ageing from sun exposure can play a major part.
Weathering damage occurs not only outdoors, but also inside, e.g. behind window glass. Since the impact of weathering varies considerably with the different climatic conditions, the test equipment to simulate these conditions must be as flexible as possible.
Our new xenon weathering chamber allows us to simulate the complete spectrum of sunlight. The unit is very flexibly equipped, so that we are able to cover a wide variety of the common international standards. It is equipped with an optional water spray function and allows both black panel and black standard temperature control. Furthermore, various filters - e.g. window glass - are available.
We are happy to offer you further options on request. Please contact us!
Call us now: +49 (0) 40 709 73 76-10 or email us: email@example.com
The “Compact NX5 multifunctional test generator“ arrived.
Quicker. More efficient. Very modern.
We welcome a new “toy“ a tour laboratory in Kiel.
From now on we are able to perform different susceptibility tests within a very short time with this new generator. It comes with a high degree of automation, which enables us to deliver results within a very short time.
We offer different susceptibility tests, for example against burst, surge, magnetic fields with mains frequencies, pulsed magnetic fields, voltage variations as well as power supply failure.
Are you interested in susceptibility testing?
Contact us via email for further information and requests or call us directly +49 (0) 40 709 73 76-10.
Extension of our EMC accreditations!
We have added new testing procedures to our accredited portfolio. For example in the area of telecommunications we now perform tests according to EN 301 489-1.
In addition we have added current guidelines of further shipbuilding-classification societies such as IACS UR E10 and DNVGL-CG-0339.
Read more about our DAkkS accreditations here.
From now on, we are flexible accredited when it comes to all procedures.
This means that we are entitled to update the date of issue of the accredited testing standards independently.
Contact us directly via email or call us: +49 (0) 40 709 73 76-10.
Welcome aboard – the “Maritimes Cluster Norddeutschland“ came for a visit
On 4th of July we opened our doors and welcomed the members of the “Maritimes Cluster Norddeutschland“.
The reason for the visit?
We were part of the pilot project of the “Cluster“ and presented our company to the other members of the Hamburg region. The goal of this whole event was and will always be to get to know each other better, to network and to understand “what everyone else is actually doing.“
On this day it was three companies of the Hamburg region who opened their doors for the other members.
At our laboratory in Hamburg we welcomed the group of participants and showed them our premises, followed by a demonstration of two of our test procedures. Firstly, we performed a dynamic inclination test with our new wave simulator and used a coffee machine as an example. Secondly, we demonstrated a vibration test with a touch panel PC as a product example.
All in all it was a very successful day for everyone involved – the members as well as the organizer of the project itself. Everyone was very interested and had some intensive talks during the whole day, which made the project a huge success.
You will be able to find future dates on the website of the “Maritimes Cluster Norddeutschland”.
UDT Bremen – finished diving
From May 30th until June 1st 2017 you were able to visit us at the underwater defence and security community's most relevant exhibition and conference in Bremen, the UDT.
This year we got to explore the underwater defence world and its latest news with our booth partner Condok. At our booth, we welcomed many visitors and were very happy to network as well as inform them about our capacities in the area of mechanic shock testing as well as climate testing and EMC testing etc. .
With our new EMC video, we were able to explain and convey impressions about our work – short and sweet.
Check it out right here!
Boarding completed - AIX 2017
Back at our laboratory - we draw a positive balance!
At our Treo booth we welcomed many visitors and customers to network. Especially due to interesting conversations with old and new contacts, the whole event became a very successful one. A relaxed but also very professional atmosphere was the perfect condition to inform interested visitors about our new optimizations in the field of rapid decompression tests.
Our next stop is the UDT (Undersea Defence Technology exhibition/conference) in May 2017.
Further informations will follow soon.
Rapid decompression tests with an improved test system
An important qualification test for components and products of the aviation industry is the simulation of rapid decompression in the aircraft cabin.
At our environmental simulation laboratory in Hamburg we are now able to perform altitude and decompression tests with high-speed pressure changes.
Instead of the usual speed which is 10-15 seconds to reach the altitude pressure, our new test chamber needs less than 2 seconds!
Even more demanding requirements like decompression curves according to Boeing standards can be fulfilled without any problems. All our tests in this area are accredited and performed according to customer-specific demands.
EMV 2017 - Die Workshops - und Treo ist dabei
Workshop: Praxis normgerechter EMV-Messungen von komplexen Systemen und Anlagen mittels moderner Zeitbereichsmessverfahren
Termin: Donnerstag, 30.03.2017, 08:30 - 11:30 Uhr
Int. Fachmesse mit Workshops für Elektromagnetische Verträglichkeit mehr
B.Sc. Carsten Möller, Treo - Labor für Umweltsimulation GmbH, Kiel, Deutschland
Dipl.-Ing. Arnd Frech, GAUSS INSTRUMENTS GmbH, München, Deutschland
Thomas Smazinka, Fraunhofer Institut für Integrierte Systeme und Bauelementetechnologie IISB, Erlangen, Deutschland
Dr.-Ing. Stephan Braun, GAUSS INSTRUMENTS GmbH, München, Deutschland
Während EMV-Messungen klassischerweise sehr zeitaufwendig und bedingt durch Vor- und Nachmessung relativ komplex waren, so ist es durch die Volldigitalisierung der EMV-Messtechnik gelungen, die Prüfverfahren deutlich zu vereinfachen, weitergehende Analysen vorzunehmen und Entstörmaßnahmen bereits während der Messung vorzunehmen. Gerade bei komplexen Systemen und großen Anlagen, bestehend aus vielen Komponenten und Subsystemen mit vielfältigen Funktionen, vielen unterschiedlichen Betriebszuständen und sich kontinuierlich ändernden Umgebungs- oder Lastbedingungen, ist dies von entscheidender Bedeutung.
Mehr Informationen hier.
AIX 2017 - Your boarding ticket is now available
„Ladies and gentlemen. Now we will start with our today´s boarding, flight AIX-2017, off tot he Treo booth 6C80/L – hall B6. We are asking the first and business class passengers to show their tickets and enter the aircraft...“
Be a passenger of this special flight!
This is your personal invitation to visit us at the Aircraft Interiors Expo, the biggest global event oft he aircraft industry, in Hamburg from April 4th-6th.
Inform yourself about current Treo news, for example that we are now able to perform rapid decompression tests according to requirements of Boing. In particular, this means that we are able to evacuate the test room up to altitude pressure within a few split seconds.
To find out more about this option and other special as well as unique test procedures for the aircraft industry you are welcome to talk to our managing director Dr. Hanno Frömming in person at our booth 6C80/L, hall B6.
April 2017, 4th-6th | daily 9 am- 5pm | booth 6C80/L, hall B6 | Hamburg Fair
Still no boarding ticket to enter the AIX 2017?
Make sure you get one here – for free!
You wish to make a certain appointment with our managing director Dr. Hanno Frömming?
Call us now: +49 (0) 40 709 73 76-10 or email us: firstname.lastname@example.org
Here you will find us!
Welcome to our team!
Both are now part of our Treo team, will support us in Hamburg and enrich us with their knowledge.
We are very happy to enhance our team and looking forward to working together. We are ready to start in this moment…
Role reversal at our EMC laboratory
Our Treo laboratory in Kiel is characterized by the successful cooperation between Peter Sell and Carsten Möller.
As a team they carry out electromagnetic tolerance tests at a high level, according to your demands.
It is two generations, working on similar lines and always willing to move in the same direction by using their knowledge and personal experiences in this area.
After working as a team for three years, Peter Sell passes on the reins to Carsten Möller and follows in Peter´s footsteps.
Now Carsten Möller has the chance to prove his skills as the head of our EMC test laboratory.
We are very happy that Peter Sell continues to be our EMC expert in Kiel and that our well-established team is still available for our customers and our laboratories.
Interested in EMV testing or further information about our laboratories? Contact us directly via email
or call us: +49 (0) 431 719 71-49.
Bye Bye CO2
In our environmental simulation laboratory in Hamburg we are now raising the green flag: We say goodbye to harmful emissions and welcome our new energy concept.
Our demanding environmental simulation tests require powerful and efficient test systems which consume a high amount of energy due to physical reasons. Therefore, sustainable supply of energy is of major importance to us.
In corporation with hit-Technopark, the officially certified environmental partner of the Free and Hanseatic City of Hamburg, we reduce and compensate the CO2 emissions now.
As the first building in the hit-Technopark, that owns a combined heat and power plant (CHP), we are now able to produce our own electricity besides heating and cooling. However, it is not possible to completely avoid CO2 emissions while heating up combinded heat and power plants (CHP). But - to neutralize the low amounts of CO2 emissions we continuously plant new trees in the Brazilian rainforest.